Vintage Cellars FGD-0400 - Manual (Page 79)

5.4.3 Interrogating High and Low Temperature Limits
1. Press WHAT IS.
WHAT
IS
2. Press TEMP LIMITS.
5
TEMP LIMITS
3. Press the number key corresponding to the selected
temperature zone.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
5.5 Temperature Scale
Temperature zones may be set in either Fahrenheit or Celsius
degrees. The default temperature scale is Fahrenheit. To change to
Celsius:
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press °F / °C. The Model 400 responds: “Degrees Celsius”
indicating Celsius scale has replaced Fahrenheit scale.
TEST
°F/°C
#
3. To return to Fahrenheit scale, repeat the key sequence. The
Model 400 responds: “Degrees Fahrenheit” indicating Fahrenheit
scale is in effect.
NOTE
When switching from Fahrenheit to Celsius, or vice
versa, the change applies to all zones configured to
read temperature. When switching temperature scales
it is important to reset high and low temperature lim-
its on all temperature zones. Refer to Section 5.4.1 to
reset temperature limits.
Chapter 5: Alarm Programming
76