Vinten Radamec Quattro SE HPM - Manual (Page 22)

20 Head Processing Module Operators Guide
During normal use the only cleaning required should be a regular wipe over with a lint-free cloth.
Dirt accumulated during storage or periods of disuse may be removed with a semi-stiff brush.
Particular attention should be paid to all the connection ports (1, 3, 6, 7, 9, 10, 11, 12, 13, 15, 16).
Adjustments
Other than periodically checking the head fixings (8), no other adjustments are required.
CAUTION! 1. DO NOT use solvent- or oil-based cleaners, abrasives or wire
brushes to remove accumulations of dirt as these damage the
protective surfaces. To clean mechanical surfaces, use only
detergent-based cleaners.
2. External electrical connection ports should only be cleaned
with a semi-stiff brush or a clean, dry air supply.