Garmin GPS 65 - Manual (Page 21)

The AutoStore™ Page displays the waypoint name, captured position,
and optional storage route. An AutoStore waypoint name is pre>
assigned as a three digit niimber. Youmaydiai^thistoanynameyou
desire. Autostore™ wajfpoints may be used for any waypoint operation
and will be part of the 250 available waypoints.
AUTOSTORE
MPT:BBB
H 39°BB.
Append to Route
To capture present position.»
/^aypoint Name
-Longitude
-Latitude
^Route StoTEige
Number
* Press AUTOSTO. The pre-assigned waypoint name is on line 1.
NOTE; The AutoStore™ location is captured as soon as you press
AUTOSTO. This allows you all the time you need to change the
waypoint name and/or confirm the Autostore.
* If you wish to give the waypoint a different name, move the cursor
to the waypoint name field and enter the name of your choice.
Press ENT. If you enter a waypoint name already used, you will
be informed with the message, *YVTT Exists fnameL* Enter a
different name if this occurs.
* Press ENT on a blank route storage number field to save the
waypoint. If tiie route storage number field is not blank, the
waypoint will be added to the route shown. (In Chapter 4, we will
discuss building a route with AutoStore.)
3.7 GETTING THERE FAST-GOTO
The GOTO fimction allows you to quickly set a course finm your position
to any waypoint.
GO TO:
HIDMER
-T
mp
«* woppoint name ta
chans« 4«itinati«n.
-Vftss IfDO ta reset man
euerboard position.
-Press ЕИТ to actiuate
GOTO naoisation._____
3-7