B&C Technologies DI-325 Industrial - Manual (Page 23)

INSTALLATION PROCEDURES
3-14
4. Be sure all side and base panels and the belt guard are on the dryer.
5. Check all service doors to assure that they are closed and secured in place.
6. Be sure the lint drawer is securely in place.
NOTE:
Lint drawer must be all the way in place to activate safety switch otherwise the
dryer will not start.
7.
Rotate the basket (tumbler / drum) by hand to be sure it moves freely.
8. Check bolts, nuts, screws, terminals, and fittings for security.
9. Check to insure air supply (80 psi) is connected to dryer.
10. Check to insure all steam shut – off valves are open.