B&C Technologies IM Series Industrial Ironer - Manual (Page 101)

Etanorm SYA
2
Contents
Page
1 General 4
2 Safety 4
2.1 Marking of Instructions in the Manual 4
2.2 Personnel Qualification and Training 4
2.3 Non-compliance with Safety Instructions 4
2.4 Safety Awareness 4
2.5 Safety Instructions for the Operator / User 4
2.6 Safety Instructions for Maintenance, Inspection
and Installation Work
4
2.7 Unauthorized Modification and Manufacture
of Spare Parts
5
2.8 Unauthorized Modes of Operation 5
3 Transport and Interim Storage 5
3.1 Transport 5
3.2 Interim Storage / Preservation 5
4 Description of the Product and Accessories 5
4.1 Technical Specification 5
4.2 Designation 5
4.3 Design Details 5
4.4 Permissible Forces and Moments at the Pump
Nozzles
6
4.5 Noise Characteristics 6
4.6 Accessories 6
5 Installation at Site 7
5.1 Safety Regulations 7
5.2 Checks to Be Carried out Prior to Installation 7
5.3 Installing the Pump / Unit 7
5.3.1 Aligning the Pump/Drive 7
5.3.2 Place of Installation 8
5.4 Connecting the Piping 8
5.4.1 Auxiliary Connections 9
5.5 Final Check 9
5.6 Contact Guard 9
5.7 Connection to Power Supply 9
5.7.1 Connecting the Motor 9
5.7.2 Setting the Time Relay 9
5.7.3 Checking the Direction of Rotation 9
6 Commissioning, Start-up / Shutdown 9
6.1 Commissioning 9
6.1.1 Lubricants 9
6.1.2 Shaft Seal 9
6.1.3 Priming the Pump and Checks to be Carried out 9
6.1.4 Start-up 10
6.1.5 Shutdown 10
6.2 Operating Limits 10
6.2.1 Temperature of Medium Handled 10
6.2.2 Switching Frequency 10
6.2.3 Minimum Flow 10
6.2.4 Minimum Permissible Speeds 10
6.2.5 Density of the Medium Handled 10
6.3 Shutdown / Storage / Preservation 10
6.3.1 Storage of New Pumps 10
6.3.2 Measures to Be Taken for Prolonged Shutdown 10
6.4 Returning to Service after Storage 10
Page
7 Maintenance / Repair 11
7.1 General Instructions 11
7.2 Maintenance / Inspection 11
7.2.1 Supervision of Operation 11
7.2.2 Lubrication and Lubricant Change 11
7.3 Drainage / Disposal 11
7.4 Dismantling 12
7.4.1 Fundamental Instructions and Recommendations 12
7.4.2 Preparations for Dismantling 12
7.4.3 Pump 12
7.4.4 Mechanical Seal 12
7.5 Reassembly 12
7.5.1 Pump 12
7.5.2 Mechanical Seal 13
7.5.3 Tightening Torques 14
7.6 Spare Parts Stock 15
7.6.1 Interchangeability of Pump Components 15
7.6.2 Ordering Spare Parts 16
7.6.3 Recommended Spare Parts Stock for 2 Years’
Operation
16
8 Trouble-shooting 17
9 Related Documents 18
9.1 General Drawing and List of Components
Etanorm SYA, SU 25
18
9.2 Exploded View and List of Components
Etanorm SYA, SU 25
19
9.3 General Drawing and List of Components
Etanorm SYA, SU 35, 55
20
9.4 Exploded View and List of Components
Etanorm SYA, SU 35, 55
21
91