Canon CDI-E154-010 - Manual (Page 25)

23
Prep
a
ri
ng the
Camera
To remove the SD card
Push in the SD card until you hear it click, then release it.
• Please watch the loading slot area carefully as you insert and
remove the SD card.
• Since the camera is writing, reading, erasing or transmitting data to
or from the SD card when the indicator blinks green, never perform
the following actions during this time. It could corrupt the image
data.
- Subject the camera body to vibration or shocks.
- Turn the camera’s power off, or open the SD card slot/battery
cover.
• Please note that SD cards formatted with other manufacturers’
cameras or a computer, or formatted or edited with application
programs, may slow down writing to the SD card or may not operate
correctly in the camera.
• You are recommended to use SD cards that have been formatted in
your camera (p. 24). The card supplied with the camera may be
used without further formatting.
See SD Cards and Estimated Capacities (p. 145).
3 Slide the SD card slot/battery cover
closed.
1
2