Outdoor Great Room GI-29 Insert surrounds IS-42 - Manual (Page 4)

4
42000 Rev C 8-26-13
Before you begin: If a power outlet is not located inside the existing fireplace (always
consult with local building codes before installing new outlets or modifying existing
electrical systems) , the insert surround pictured below has two openings for the power
cord to pass through if powering the unit from a nearby outlet outside the existing fireplace.
Be sure to plan for this if utilizing one of these pass-through holes.
Note: The fireplace can be installed in
one of two ways. Friction fit and
permanent install.
Choose whichever method works best for
your application.
Begin by assembling the insert surround
using the included screws and nuts in the
orientation shown.
Pass-through hole
Pass-through hole