Outdoor Great Room Gallery Wall-Mounted Fireplaces - Manual (Page 3)

90238 Rev B 11/8/12

Installing the Firebox into a Wall

Attach brackets to firebox as shown below using the supplied M5x10 screws
Required stud or
interior support
locations

Make any necessary electrical connections, either plugging the fireplace into an outlet located inside the
wall, or a nearby outlet on the wall face. DO NOT MODIFY OR CUT EXISTING WALL PLUG.

BEFORE INSTALLING FIRE BOX INTO WALL, MAKE SURE THE MAIN POWER SWITCH ON THE RIGHT-HAND
SIDE IS IN THE “ON” POSITION. IT WILL NOT BE ACCESSABLE AFTER INSTALLATION.

Set firebox into cutout and ensure that it is level before attaching to the wall using appropriate screws for
the wall material.

With firebox in place, the control button module can be affixed to the wall directly below the cutout with a
screw or double-sided adhesive strip. It should be mounted in a location where it will be hidden by the
glass front panel.