Ryobi YN600A - Manual (Page 8)

8 — English
OPERATiON
ASSEMBLY
WARNiNg:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNiNg:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNiNg:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
UNPAckiNg
This product has been shipped completely assembled.

Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.
WARNiNg:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the unit carefully to make sure no damage oc-
curred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PAckiNg LiST
12 Volt Inflator
Inflation nozzles (2)
HVLP Flexi Hose with Two Nozzles
Sports Ball Needle
Operator’s Manual
WARNiNg:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNiNg:
Do not attempt to modify this inflator or create accessories
not recommended for use with this inflator. Any such altera-
tion or modification is misuse and could result in a hazard-
ous condition leading to possible serious personal injury.
WARNiNg:
Do not leave items to be inflated unattended while infla-
tor is in use. These items can burst and could cause
serious injury.
cAUTiON:
The inflator is not designed for continuous use. For every
ten minutes of inflator use, ten minutes of cool down time
are required.
WARNiNg:
Since the pressure gauge is not calibrated, and is
therefore not binding for exact values, tire pressure
must be checked using a reliable measuring device be-
fore driving a vehicle with vehicle tires inflated with the
inflator. Driving a vehicle with improperly inflated tires
could result in serious injury.