Zigen HX-44 - Manual (Page 22)

Matrix Switching System—User Manual
21
7.0 Operation Examples
Example 1: Switch the NO.1 input signal to the NO.2 output channel.
Key LCD Display Operation
1. Press the NO.2 key of the
output channel for 2 seconds,
then the input channels will
begin to flicker.
2. Press the NO.1 key of the
Input channel for 2 seconds.
Example 2: Switch the NO.1 and NO.2 input signals to each NO.1 and NO.2 output
channels.
Key LCD Display Operation
1. Press the NO.1 key of the
output channel for 2 seconds,
then the input channels will
begin to flicker.
2. Press the NO.1 key of the
Input channel for 2 seconds.
3. Press the NO.2 key of the
output channel for 2 seconds,
then the input channels will
begin to flicker.
4. Press the NO.2 key of the
Input channel for 2 seconds.
Example 3: Delete
“All” settings.
Key LCD Display Operation
3. Press the ALL key on the
front panel, and then press the
OFF key to cancel all the
settings.