Chemtronics 152a Blast ES1029 - Manual

PRODUCT DESCRIPTION
152a Blast™ is an economical general-
purpose duster with a bigger blast for
cleaning applications. Its exceptional purity
jet instantly cleans surfaces free of particulate
contamination. 152a Blast™ is engineered to
remove dirt, dust, oxide particles and other
airborne particles instantly, and can be used
to facilitate the accelerated drying of solvent
cleaners. Not for use near flames, ignition
sources, nor sources of static discharge.
 High pressure for contamination control
 Ozone safe; CFC and HCFC free
 Flammable
 63 psig at 70
o
F
 Nonabrasive; safe for most materials.
Will not scratch surfaces
 No residue
 Cleans hard to reach areas
TYPICAL APPLICATIONS
152a Blast™ is used in a wide range of
applications including:
 Audio/Video Equipment
 Fax Machines
 Keyboards
 Laboratory Instruments
 Microcomputers
 Photo Equipment
 Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.0
°F
Vapor Density (air=1)
@ 77
°F
2.4
Solubility in Water
@ 77
°F F/1 atm
0.15% by weight
Specific Gravity
(water = 1 @77
°F)
1.22
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor Slight Ethereal
Flammable limits in
Air, % by Volume LEL : 3.9
UEL : 16.9
Flash Point (TCC) <-50 C (<-58 F)
Shelflife 5 years
COMPATIBILITY
152a Blast™ is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster,
compatibility must be determined on a non-
critical area prior to use.
CHEMTRONICS
Technical Data Sheet
152a Blast
™
TDS # 1029