Warpia SWP120A RevB SteamHD Getting Started User Guide - Manual

1. SOFTWARE INSTALLATION:
Prior to installing the Warpia StreamHD software it is important to make sure there
is no prior installation of Wireless USB or Display Link software from Warpia or
other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL
CAUSE THE STREAMHD SOFTWARE NOT TO WORK PROPERLY
If you see either Wireless USB or Display Link programs, first uninstall them by
going to the Control Panel- Programs and Features section and clicking on the
Uninstall tab.
StreamHD – SWP120A
Rev B
Quickstart Guide
5. CONFIGURING AUDIO SETTINGS:
The PC should automatically connect via the StreamHD to the Wireless audio device.
If it does not, or if you would like to switch audio devices, you can select the Audio
Playback device from the drop down dialog in Windows ® 7 as follows:
Right click the Audio Properties icon in the System Tray and select Playback
devices.
For full details of installations procedures and troubleshooting for all Windows ®
Operating Systems, refer to the installation manual available on the installation CD,
or online at www.warpia.com/support
To Contact Support: [email protected]
For all audio outputs (HDMI, 3.5mm or S/PDIF)
Click “Speakers USB PnP Sound Device” and click “Set Default” Click “Speakers USB PnP Sound Device
Next, Insert the StreamHD installation CD into the PC and begin the software
installation by running the Setup.exe file. Ensure that the PC Adapter is NOT
plugged into the PC at this time.