Panasonic KX-TC1891B - Manual (Page 50)

ф Using the Directory
1
7
Press (FUNCTION/EXIT/CH)
While the arrow points to
"Save
dxrartDry', press FWD/EDIT
(Yes
key)
■ The display shows the number of stored items
in the dirEctory
Enter a name, up to 15 characters, with the
dialing buttons, BACK (3 or FWD/EDIT
B
■ See the steps for entering names and symbols
(P 51)
■ If a name is not required, press (Next
key) and go to step 5
Press (^ (Next key)
Enter a phone number, up to 22 digits
■ Each lime you press
[ INTERCOM/HOLD/^LEA^. a character is
erased from the right To erase all of Ihe digits,
press and hold | INTERCOM/HDLD/CLE'^
Press (3 (Next key)
►Save directory
Ringer volume
▼A ►=Yes
Directnry-
2 0 It ems
Enter name
□
T=Next
Enter name
Tom Jone^
T=Next
03В7654321П
4^
T=NBxt
Tom Jones
□ 3B7 C54321
A=Edit ►=Save
Press FWD/EDIT B (Save key)
■ A beep sounds
■ To continue storing other items, repeal from step 2
■ To return to the standby mode, press [FUNCTION/EXIT/CH]
'If a pause is required for dialing, [REDIAL/PAUSE] can be stored in a phone
number counting as one digit (p 64) in step 5
• You can exit the programming mode any time by pressing [FUNCTION/EXIT/CH)
• If the display shows "Pireotpry full" in step 2, the display will return !□
step 1 Press (FUNCTION/EXIT/CH] to exit the lisl To erase other stored items
from the directory, see page 57
'If the display shows "save error" in step 7, the item cannot be stored in the
directory Try again from step 1
50