Panasonic WV-CP160 - Manual (Page 15)

** CAM SET UP ••
4. Gain Control Setting (AGC ON/OFF)
You can set the gain (brightness level por­
tion of an image) to automatic level adjust­
ment (ON) or fixed level (OFF),
Move the cursor to the AGC parameter and
select automatic level adjustment (ON) or
fixed level (OFF).
Note: If ON is selected for the AGC para­
meter, the noise reduction function is
automatically activated under low tight
conditions to reduce noise. In pictures containing a moving object, this may result in an
afterimage.
CAMERA 10 OFT *1
ALC/ELC ALC
SHUTTER OFT
AGC ON i
SENS UP OFF
WHITE BAL ATH “1
SET UP ENABLE
5. Electronic Sensitivity Enhancement (SENS UP)
There are two modes for SENS UP,
AUTO: If you select X10 AUTO, for
example, the sensitivity is raised
automatically to XIO max. When
AUTO is selected, AGC is auto­
matically set to ON,
FIX: If you select X32 FIX, for example,
the sensitivity is raised to just X32.
—
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON *
SENS UP OFF
WHITE BAL ATW 1
END SET UP ENABLE
4
Move the cursor to the SENS UP parameter and select the parameter for electronic sensitivi­
ty enhancement. ;
The preset values for SENS UP (electronic sensitivity enhancement) change by pressing
Cl or as shown at right:
When OFF is selected for ______________________ ____ _ 'X ioauto -
SUPER-D2 on the CAM SET UP
menu.
When ON is selected for
SUPER-D2 on the CAM SET UP
menu.
r—0FF-*X2 AUTO
X32 FIX —X16FIX-
L
X4AUTO-
-XIO FIX-
-X6 AUTO
X6FIX—X4 FIX- X2 FIX
C
OFF—X2AUTO
- X10AUTO
X4AUTO
X6AUTO —
□
Notes:
• When ON is selected for SUPER-D2 in the ALC CONT menu, FIX is not available for this
item.
• When you select AUTO for SENS UP and ON for SUPER-D2, the SENS UP function has
priority so that the SUPER-D2 function is not activated automatically.
• While the SENS UP function is selected, noise, spots or a whitish phenomenon may
appear in the picture when the sensitivity of the camera is increased. This is a norma!
phenomenon.