Yamaha HTR-5830 - Manual (Page 50)

ADVANCED SETUP MENU
The ADVANCED SETUP menu is displayed in the front
panel display.
During the advanced setup procedure, audio output is muted.
During the advanced setup procedure, only the STANDBY/
ON, STRAIGHT (EFFECT) and PROGRAM <1 /C> buttons
on the front panel ;ue available for operation.
,2
While holding
down, press
Turn off the power fo this unit, and while
holding down STEREO (EFFECT), press
STANDBY/ON.
This unit turns on, and “PRESET” appears in the
front panel display.
If you are using Asia and General model, you can
select the menu by pressing PROGRAM <3 /!>.
■ ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Factory presets PREEiET
Use to reset all parameters to the factory presets (see page
57).
Choices:
CANCEL, RESET
• Select CANCEL if you do not want this unit’s
parameters to be initialized.
• Select RESET if you w'ant all of this unit's parameters
lo be initialized.
Note
• 1 Ills setting does not affect ADVANCED SETUP menu item
peuameters.
< Asia and Genera! models only >
Tuner TU
Use to switch the frequency step selection according to
the frequency spacing in your area.
Choices: AWUO/FMIOO, AM9/EM50
• North. Central and South America:
AM10/FM10()(kHz)
• Other areas: AM9/FM50 (kHz)
Press STEREO (EFFECT) repeatedly to
toggle between the available parameters.
Press STANDBY/ON to confirm your
selection.
This completes the advanced setup procedure.
The settings you made are reflected the next time this
unit's povier is turned on.
46