Yamaha RM602 - Manual (Page 13)

INPUTS
INPUT
TERMINALS
INPUT
SELECT INPUT
IMPEDANCE SOURCE
IMPEDANCE' SENSITIVITY*
(MAXIMUM GAIN)
INPUT LEVEL
NOMINAL LEVEL
MAX. NON­
CLIPPING LEVEL CONNECTOR
CH INPUT
CH1-CH6
-50 dB
50-250 ohms
MIC or
600 ohms LINES
-62 dB
(0.62 mV)
-50 dB
(2.5 mV)
-22.5 dB
(58.1 mV)
-35 dB 20 k-ohms
-47 dB
(3.5 mV)
-35 dB
(13.8 mV)
-7.5 dB
(327 mV)
PHONE JACK
-20 dB
-32 dB
(19.5 mV)
-20 dB
(77.5 mV)
-I- 7.5 dB
(1.84 V)
TAPE IN CH1~CH4 10 k-ohms TAPE DECK
-22 dB
(61.5 mV)
-10 dB
(245 mV)
■H7.5 dB
(5.81 V)
PIN JACK
PHONO IN CHS, CH6 47 k-ohms TURNTABLE
-62 dB
(0.62 mV)
-50 dB
(2.5 mV)
-22.5 dB
(58.1 mV)
PIN JACK
AUX IN (L, R) 10 k-ohms 600 ohms LINES
-26 dB
(38.8 mV)
-20 dB
(77.5 mV)
+ 20.0 dB
(7.75 V)
PIN JACK
EFFECTS RETURN (L, R) 10 k-ohms 600 ohms LINES
-26 dB
(38.8 mV)
-20 dB
(77.5 mV)
•f20.0 dB
(7.75 V)
PHONE JACK
ST INSERT IN (L, R) 10 k-ohms 600 ohms LINES
-16 dB
(123 mV)
-10 dB
(245 mV)
+ 20.0 dB
(7.75 V)
PHONE JACK
(TRS)
OUTPUTS
OUTPUT TERMINALS
OUTPUT
IMPEDANCE LOAD
IMPEDANCE
OUTPUT LEVEL
CONNECTOR
RATED LEVEL
MAX. NON­
CLIPPING LEVEL
STEREO OUT (L, R) 330 ohms 10 k-ohms LINES -10 dB (245 mV) + 17.5 dB (5.81 V) PHONE JACK & PIN JACK
MONITITOR OUT (L, R) 330 ohms 10 k-ohms LINES 0 dB (775 mV) + 17.5 dB (5.81 V) PHONE JACK
EFFECTS SEND 330 ohms 10 k-ohms LINES -10 dB (245 mV) + 17.5 dB (5.81 V) PHONE JACK
TAPE OUT (1-4) 330 ohms 10 k-ohms LINES -10 dB (245 mV) + 17.5 dB (5.81 V) PIN JACK
ST INSERT OUT (L, R) 330 ohms 10 k-ohms LINES -10 dB (245 mV) + 17.5 dB (5.81 V) PHONE JACK (TRS)
PHONES 100 ohms 8 ohms PHONES -22 dB (61.6 mV) - 4.5 dB (462 mV) STEREO PHONE JACK
* Sensitivity is the towest ievei that wiii produce an output of -10 dB.
0 dB = 0.775 Vr.m.s.
Ail inputs and outputs are unbalanced.
DIMENSIONS
Unit: mm (Inch)
12