Yamaha MC2403 - Manual (Page 8)

6 3
20
1/2/3
6 3
¥U
CUE/MK
VU meters and METER SELECT switches
(AUX 1/AUX 2/AUX 3/CUE/MIX)
The MC-series mixing console features four VU meters
with built-in LED peak indicators for monitoring signal
levels. The peak LED light at +14dB. The center meter
pair (L STEREO R) continuously monitors signals on the
main stereo program buss. The AUX 1/2/3 meter can be
switched to monitor signals on the AUX 1, AUX 2 or AUX
3 busses by pressing the corresponding METER assign
switch. The right meter can be switched between moni­
toring the CUE or MIX levels by pressing the CUE or MIX
METER SELECT switch.
REAR PANEL CONNECTORS AND CONTROLS
® POWER switch
Flip up to turn the power ON, and down to turn the
power OFF. The VU meter lamps will light when the
power is ON.
) PHANTOM MASTER switch
Turn this switch ON to apply +48V DC to the LO-Z
XLR-type input connectors when using phantom-pow­
ered condenser microphones.
•NEVER turn the PHANTOM MASTER switch ON
when using line-level sources connected to the LO-Z
inputs.
) MIX OUT connectors
The MIX OUT connectors (balanced XLR-type and
unbalanced phone) carry the mono MIX outputs sig­
nals. Signal levels are the same as for the stereo OUT
connectors.
)AUX SEND(1,2&3) jacks
These jacks deliver the AUX 1, AUX 2 and AUX 3
mixes, respectively, to feed an external effect device or
power amplifier. Nominal output level /impedance is
+4dB/10ka
В