Yamaha San Diego CD32 - Manual (Page 18)

EQUALIZER AND X-BASS
SPECIFICATIONS
Equalizer and X-BASS
X-BASS
The X-BASS feature can be used to
boost the bass at low volume levels.
To activate X-BASS,
O keep the EQ/X-BASS button (s)
pressed until “XBASS ON” appears
in the display.
“X-BASS” appears in the display.
To deactivate X-BASS,
O keep the EQ/X-BASS button @
pressed until “XBASS OFF”
appears in the display.
“X-BASS” disappears.
Selecting preset sound effect
You can select preset sound effect for
the following styles of music:
• CLASSIC
• POPM
• ROCKM
The settings for these music styles have
already been programmed.
To select one of the sound presets,
o keep pressing the EQ/X-BASS
button ® until the required setting
appears in the display.
If you want to deactivate the sound pre­
set,
o keep pressing the EQ/X-BASS
button (i) until “DSP OFF” appears
in the display.
Specifications
Amplifier
Output power:
Las Vegas CD32: 4 x 22 watts sine
in accordance
with DIN 45 324
at 14.4 V 4
X
50
watts max. power
San Diego CD32: 4x15 watts sine
in accordance
with DIN 45 324
at 14.4 V 4
X
40
watts max. power
Santa Fe CD32: 4x18 watts sine
in accordance
with DIN 45 324
at 14.4 V 4
X
45
watts max. power
Tuner
Frequency ranges US:
FM:
AM:
87.5-107.9 MHz
530- 1710 kHz
FM mono sensitivity:
15dBf
FM frequency response:
35-16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-Amp Out
(not applicable to San Diego CD32)
Output: 1.5 2.5 dB
Subject to changes!
18
9BLAUPUNKT