Computing on the road, Setting panasonic power management – Panasonic CF-M32 Series User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Computing On The Road
Setting Panasonic Power Management
(How to set [Power Saving] and [Operation Setting])
y Click [Start] - [Settings] - [Control Panel], then double
click [Panasonic Power Management]
Or, double-click the icon in the task bar.
(The icon is not displayed, if (Show settings icon on the task bar] in [Panasonic
Power Management] is not set.
2
Click [Power Saving] tab, then set [Power Saving] under
[Battery] or [AC]
X
note
>
• When this command is used, if the AC adapter is connected, the [AC] set
ting will be enabled. If the AC adapter is not connected, the [Battery] set
ting will be enabled.
• The [pn] and |P
6
| keys can be pressed together to toggle the mode in the
following sequence; Standard -> Power Saving —> User Setting.
3
Click [Operation Setting] tab, then set [Suspend] under
[Panel Switch]
4
Enter a check next to [Enable Automatic Hibernation], and
set the time which must elapse before the change takes
place
5
Select [Turn Off PC Card in Suspend Mode]
6
Click [OK]
X
note
)----------------------------------- ^----------------------------------s
You can also run [Power Management] from the Setup Utility (Cépage 76).
26