STIEBEL ELTRON ULTRONIC 2 W - Manual (Page 4)

4 | ULTRONIC ™ 1 / ULTRONIC ™ 2 TOUCHLESS AUTOMATIC HAND DRYERS WWW.STIEBEL-ELTRON-USA.COM
GENERAL INFORMATION
SAFETY PRECAUTIONS
2. Safety precautions
!
Please read and follow these instructions.
Failure to follow these instructions could
result in serious bodily injury or death.
There are no user-servicable parts. Service of
the unit must be performed by qualifi ed service
technicians.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
a) Use the unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
b) Before servicing or cleaning the unit, switch
power off at service panel and lock the service
disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to
the service panel.
!
WARNING
To reduce the risk of fi re, or electric shock,
do not use this hand dryer with any solid state
speed control device.
DANGER Electrocution
Before proceeding with any installation,
adjustment, alteration, or service of this unit all
circuit breakers and disconnect switches servicing
the unit must be turned off. Failure to do so could
result in serious personal injury or death.
DANGER Electrocution
Never remove the unit's cover unless the
electricity servicing the unit is turned off. Failure
to do so could result in serious personal injury or
death.
DANGER Electrocution: The unit must be
properly grounded. Failure to electrically
ground the product could result in serious personal
injury or death.
WARNING Injury
Where children or persons with limited
physical, sensory or mental capabilities are allowed
to control this appliance, ensure that this will only
happen under supervision or after appropriate in-
structions by a person responsible for their safety.
Children must be supervised to ensure that they
never play with the appliance.
WARNING Fire
Never operate this appliance ...
-if the minimum clearances to adjacent object sur-
faces are not maintained, for example to furniture,
net curtains, curtains, textiles or other fl ammable
materials (for minimum clearances, see specifi ca-
tion/dimensions chapter).
- in rooms where the appliance is at risk from fi re
or explosion as a result of chemicals, dust, gases or
vapors.
- in the direct proximity of pipes or containers that
carry or contain fl ammable or explosive materials.
- if work such as laying cables, grinding or sealing is
carried out in the installation room.
- if sprays, fl oor polish or similar products contain-
ing petroleum are used. Vent the room suffi ciently
before using unit.
- if an appliance component is damaged, the appli-
ance has fallen over or already had a fault.