California Faucets Single-Hole Faucets - Manual

CF-XX01-2_ii_100601.doc Pg 1
CF-3301-2 CF-3501-2
CF-4201-2 CF-6201-2
Single Hole Lavatory Vessel Faucet
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure: 20 to 70 psi *
* If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING FAUCET TO SINK/DECK
• Insert O-RING (2) into bottom of BASE RING (1) and
center over sink/deck THROUGH-HOLE (3)
NOTE: Recommended sink/deck THROUGH-HOLE is Ø1-d”
• Insert FLEX HOSE (5) (one at a time) and THREADED
ROD (6) though BASE RING (1) and sink/deck
THROUGH-HOLE (3)
• Place BODY (4) on top of BASE RING (1)
• From underside of sink/deck THROUGH-HOLE (3),
place MOUNTING BRACKET (7) and NUT (8) onto
THREADED ROD (6)
• Tighten NUT (8) until BODY (4) and BASE RING (1) is
secure to sink/deck
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
Ø 1-d”
CF-3301-2 CF-3501-2 CF-4201-2 CF-6201-2