Image overlay – ChemoMetec NC-3000 User Manual
Page 31
991-3003 Rev. 1.0
August 2013
31
Image Overlay
An image overlay may be enabled with the
button near the right bottom corner of the image. It
performs two kinds of cell marking on the displayed image:
When an analysis is completed successfully, cells that are included in the analysis are marked with a
square.
When a large scatter plot or a large histogram is open in the
outside the selected marker or gate respectively, can be marked with the overlay squares by
selecting ‘Add Cells Inside Selected Gate to Image Overlay’ or ‘Add Cells Outside Selected Gate to
Image Overlay’.
The cells are marked with squares and this overlay can be toggled on and off by clicking the
button.
When one of the two overlay functions has been used it is possible to choose cells in the
holding the Ctrl button down and clicking on individual cells in the image. This will mark the last selected
cell with a yellow square and previously selected cells with a pink square. Selected cells will be marked in
The selected cells for the image overlay can be unselected by double clicking in the image, by right clicking
the
button or the large plot and selecting ‘Delete Image Overlay’ or by right clicking on a large plot and
selecting ‘Delete Image Overlay’.
See the
for details about polygons and cell gating. See the
details about markers and cell gating.