COP-USA NVMS 1000 User Manual
Page 21
18
NVMS-1000 User Manual
Video Loss Alarm Settings
Click “Video Loss” to enter the interface. The steps of
configuring video loss are same with the device settings,
please refer to the video loss chapter of device user manual.
Video Loss of System
Click
“Video Loss of System” to enter the right window.
You can set the video loss of system.
PTZ Settings
Click “PTZ Protocol Configuration” under PTZ
Settings to enter the interface. You can enable or disable
PTZ. From the Protocol and Baud Rate drop-down
menu, choose a protocol and a baud rate to associate
with the PTZ, and then input the address of the PTZ
connecting the software.
Click “Preset Point Configuration” under PTZ
Settings to enter the interface. Enable corresponding
preset points and create a new name in the ―New
Name‖ field by selecting the preset point. Adjust the
dome direction, speed, etc by clicking the buttons.
Click
【Save Position】to save the current position of the
dome.