Cub Cadet i1050 - Manual (Page 26)

6 s
ectiOn
7— s
ervice
NOTE: References to left and right are from the front of the
tractor in the following instructions.
Pull the right side of the belt forward and place the nar-
row V side of the belt into the PTO pulley.
While holding the belt and pulley together, rotate the
pulley to the left. Continue holding and rotating the
pulley and belt until the belt is fully rolled into the PTO
pulley. Refer to Figure 7-6.
WARNING!: Use caution to prevent pinching
your fingers when rolling the belt onto the PTO
pulley.
•
•
Figure 7-6
PTO Belt
Rotate
Pulley
46" Mower Deck Replacement Belt Routing
Figure 7-4 Replacement Belt Routing 46" Mower Deck
50" Mower Deck Replacement Belt Routing
Figure 7-5 Replacement Belt Routing 50" Mower Deck