EKLIPES EKLIPE Bike-2-Bike Jr. Plug-In 2000 Amp EZ Jump-Start Kit - Manual (Page 3)

The Below Picture is what your Harness Should Look like on your Bike
Plug (A) In the Picture Shows the BMW Style Jump Start Plug
The Female BMW Plug Side of our EK1-153 Battery Harness is actually a 12 Gauge 2000 Cranking Amp Jumper Cable Plug
for our 5 Ft 5 inch 12 Gauge Jump-Start Extension Cable with 2
Male BMW Plugs on each end to plug into each Harness for
easy Jump Starting. When not using just put the Cap on and it will be there when you need it.
Plug # 2 on Battery Harness is a SAE Duel Pin Quick Connector Plug
The SAE Duel Pin Quick Connector Plug side on our EK1-153 Battery Harness has a 15 Amp Fuse Link in it to protect all
your electronics and also works on all Our EKLIPES Electronics, Motorcycle / Power Sport Battery Chargers and Compatible
Heated Clothing
Now that you have your Jump Start Battery Harness installed correctly on your bike all you have to do when you need a Jump
Start is Plug in the Jump Start Cable to the Battery Harness and
If the other Bike you want to Jump from has one of our Jump Start harness on his bike then all you have to do is plug the cable
into his Harness and you are ready to go.
OR
If the other Motorcycle or Vehicle does not have one of our Harness’s then just plug in the Alligator Clips into your Jump
Start cable attach the Alligator Clips onto the battery you want to Jump From (Red Positive / Black Negative) and then Plug
your Jump Start Cable into your Jump Start Plug (Plug # 1) on your Jump Start Battery Harness.
Now For the First time EVER, you can now Jump-Start one Motorcycle or Power Sport vehicle from another by Just plugging
directly into the 2000 Amp Female BMW plug located on your EZ Jump Start Battery Harnesses ! (NO MORE ALLIGATOR
CLIPS, NO MORE HASSLE IF YOUR OTHER BIKE HAS OUR NEW JUMP START HARNESS!)
Brookshire Innovations, LLC
Home of EKLIPES Product Lines
Office: 1(916)-786-7601 Fax: 1(916)-786-7607
www.EKLIPES.com Posted on Website Dec 15th 2010