Casio LK35 - Manual (Page 14)

E-12
■ Phones/Output Jack
Before connecting headphones or other external equipment, be sure to first turn
down the volume settings of the keyboard and the connected equipment. You can
then adjust volume to the desired level after connections are complete.
[Rear Panel]
PHONES/
OUTPUT
DC 9V
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
White Red PIN plug
Stereo standard plug
PHONES/OUTPUT Jack
Keyboard amp,
guitar amp,etc.
1
2
3
Connecting Headphones (Figure 1)
Connecting headphones cuts off output from the keyboard’s built-in speakers, so you
can play even late at night without disturbing anyone.
Audio Equipment (Figure 2)
Connect the keyboard to an audio equipment using a commercially available con-
necting cord with a standard plug on one end and two PIN plugs on the other end.
Note that the standard plug you connect to the keyboard must be a stereo plug,
otherwise you will be able to output only one of stereo channels. In this configura-
tion, you normally set the input selector of the audio equipment to the terminal
(usually marked AUX IN or something similar) where the cord from the keyboard is
connected. See the user documentation that comes with your audio equipment for
full details.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord to connect the keyboard to a musical
instrument amplifier.
Note
• Be sure to use a connecting cord that has a stereo standard plug on the end you
connect to the keyboard, and a connector that provides dual channel (left and right)
input to the amplifier to which you are connecting. The wrong type of connector at
either end can cause one of the stereo channels to be lost.
Connections
475A-E-014A
LK35_E_08-16.p65 03.7.4, 11:40 AM Page 12 Adobe PageMaker 6.5J/PPC