Kofax Business Interaction Server - Manual (Page 28)

Chapter 6
22 Business Interaction Server Configuration Guide
2 In the Navigator, select Configuration | Fax Connector. The Fax Connector
page appears.
Figure 6-1. Fax Connector Page with Fax Connector Type Other than None
Note The default fax connector type is “None”.
3 Do one of the following to access the Fax Connector Wizard:
„
If you want to configure the fax connector for the first time or your current
fax connector type is None, click Configure fax connector.
„
If you want to change your current fax connector settings with a fax
connector type other than None, click Modify. Optionally, click Test
Connection to verify that the connection to your fax server can be
established using the current settings.
4 Select your fax connector type and click Next.