AltiGen MAXCS 7.0 Update 1 MaxMobile User Guide for iPhone - Manual (Page 14)

10 MaxMobile Communicator iPhone Edition
Turning on the Speaker
To put a call on speaker, tap the speaker button in the iPhone’s call options
screen (see Figure 5). You can do this right after you have answered a call
in the iPhone’s Answer/Decline screen, and before you open MaxMobile.
If you are on a call in MaxMobile and want to turn the speaker on or off,
touch the green bar at the top that says Touch to return to call (see figure
above). This takes you to the iPhone call options screen where you can tap
the speaker button. Then, to get back to MaxMobile, press the iPhone
Home key and then tap the MaxMobile icon.
Calling Restriction
If you’re on an iPhone call (as opposed to a MaxMobile call) you can’t
make a call through MaxMobile. You can still receive a call directed to
your MaxMobile extension. The iPhone gives you the option to take the
MaxMobile call and put the iPhone call on hold.
If You Can’t Log In Again
If you were previously logged in and now you can’t log in because, for
example, the IP address for your company phone server has changed,
1. Press the iPhone Home button.
2. Tap Settings and then MaxMobile.
3. Bring your MaxMobile settings up-to-date.
Making a Call Using a Stored Number
Calls can be initiated from a number of screens: Tap Favorites, Directory,
Call Log, or Voicemail, then tap the entry you want to call. If the call is not
to another extension user on your company’s MAXCS system, you may
choose between Call Via Server and Call Direct options.
Use the Call Via Server option when you want to make a call to an
extension or to an outside number through the AltiGen MAXCS system.
Use the Call Direct option to make a call directly to an outside
number without going through the MAXCS system.