Canyon CNA-BTHS02 - Manual

EN
 Alternating red and blue LED indicate headset
has entered into the pairing mode and ready to
be detectable for the first time.
 Blue LED flashing slowly indicates the device is
powered on and connected.
 Solid red LED indicates the battery is charging.
Bluetooth Headset
Quick Guide v1.0
Article: CNA-BTHS02x
Package Contents
1. BT headset
2. Quick Guide V1.0 3. USB2.0 charging cable
4. Warranty Card
Hardware Overview
Specification
 Bluetooth Specification v3.0+EDR compliant
 RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band
 Frequency Response: 20 Hz – 16,000 Hz
 Very high Signal to Noise Ratio (SNR):90 dB
 Working distance : 10-15 M
 Total Harmonic Distortion (THD): 0.08%
 LED Indicator Status: Blue, Red
 Rechargeable 360mAh Li-Polymer Battery: 3.7V 360mA
1.
LED LIGHT
2.
Power button ON/OFF (press the
button down for long time)
Volume up/down (Up switch the
button mean volume+; the headset
will make a beep if the volume are on
full blast; Down switch volume-, the
headset will also make a beep if the
volume are on min.)
Previous/Next (press the button
up/down for long time)
Play/Pause (when listening the
music, press button one time, the
music will be paused, press again,
the music will go on)
3.
USB interface for charging
4.
Microphone