Champion Power Equipment 42436 - Manual (Page 18)

15
REV 42436-20140115
ENGLISH 42436
Oil
Use 10W-30 automotive oil.
Oil capacity is 0.4 qt. (0.4 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
Fuel
Fuel capacity is 1.5 gal. (5.5 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
Generator Specifications
– Model 42436
– Rated Wattage 1200 Watts
– Starting Wattage 1500 Watts
– AC Load 120 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 1.45 gal. (5.5 L)
– Gross Weight 59.5 lb. (27 kg)
– Net Weight 52.9 lb. (24 kg)
– Height 14.8 in. (37.6 cm)
– Width 14 in. (35.5 cm)
– Length 17.8 in. (45.3 cm)
SPECIFICATIONS
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP E6RTC
Replacement spark plug: NGK BPR6HS or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
Engine Specifications
– Model YF152FD-2-010
– Displacement 80cc
– Type 4-Stroke OHV
– Start Type Recoil
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.