CHEVROLET 2011 Colorado - Manual (Page 283)

Black plate (37,1) Chevrolet Colorado Owner Manual - 2011
Vehicle Care 10-37
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back‐up Lamp
To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2‑7.
2. Remove the two rear lamp
assembly screws near the
tailgate latch.
3. Pull the lamp assembly away
from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Holding the socket, pull the old
bulb straight out to release it
from the socket.
6. Push the new bulb straight into
the socket until it clicks.
7. Insert the bulb socket into the
taillamp assembly and turn it
clockwise to secure.
8. Reinstall the taillamp assembly
and tighten the screws.