Whirlpool WU685OV - Manual (Page 5)

Cycles and options (Models WU5650V and WU6850V)
Pots & Pans cycle
This cycle supplies maximum cleaning
for cooked-on or baked-on foods. A timer
delays the cycle while the dishwasher
automatically heats the water to 145°F
(65°C) in both washes and the last rinse
(marked *). Cycle time depends on time
needed to heat water.
Push the POTS & PANS Cycle Selector
Button and select the mark next to POTS
& PANS with the Cycle Control Knob.
The cycle sequence will be:
Wash*->-Rinse->Wash*->Rinse->-Rinse*-+Dry
^Off
Heavy Wash cycle
A double wash for heavily soiled loads.
A timer delays the cycle while the
dishwasher automatically heats the
water to 145°F (65°C) in the main wash
and the last rinse (marked *). Cycle time
depends on time needed to heat water.
Push the NORMAL/HEAVY WASH
Cycle Selector Button and HI-TEMP
WASHING Option Selector Button. Select
the mark next to HEAVY WASH with the
Cycle Control Knob. The cycle sequence
will be:
Wash->Rinse->-Wash* ►Rinse->-Rmse*->Dry
^Off
Normal Wash cycle
A double wash for normal, everyday
loads. (The Energy Guide Label data is
based on this cycle.)
Push the NORMAL/HEAVY WASH
Cycle Selector Button and select the
mark next to NORMAL WASH with the
Cycle Control Knob. The cycle sequence
will be:
Wash->Rinse^Wash-^Rinse »Rinse »-Dry
^Off
Light Wash cycle
For pre-rinsed or lightly soiled loads.
Push the LIGHT WASH Cycle Selector
Button and select the mark next to
LIGHT WASH with the Cycle Control
Knob. The cycle sequence will be:
Rinse-» Wash-»Rinse-»Rinse-»Dry-»Off
Energy Saver Wash cycle
For pre-rinsed or lightly soiled loads. This
cycle uses less heated water than other
wash cycles.
Push the ENERGY SAVER WASH
Cycle Selector Button and select the mark
next to ENERGY SAVER WASH with the
Cycle Control Knob. The cycle sequence
wiU be:
Wash »Rinse-»Rinse^Dry-» Off
China Crystal cycle
(Model WU6850V only)
A light wash and gentle dry for china and
crystal. The heating element cycles on
and off during the “dry" part of the cycle
(unless the Energy Saver Dry option is
selected).
Push the CHINA CRYSTAL Cycle
Selector Button and select the mark next
to CHINA CRYSTAL with the Cycle
Control Knob. The cycle sequence will
be:
Wash-»Rinse-»Rinse-»Dry-»Off
Rinse & Hold cycle
For rinsing a few items to be washed one
or more days later.
Select the mark next to RINSE &
HOLD with the Cycle Control Knob and,
for Model WU6850V only, push the RINSE
& HOLD Cycle Selector Button. Push the
ENERGY SAVER DRY Option Selector
Button. Using the Heat Dry option may
cause food to bake on dishes. The cycle
sequence will be:
Rinse-»Rinse-»Off
Energy Saver Dry option
Air in the dishwasher is automatically
heated during the "dry" part of all cycles.
If the ENERGY SAVER DRY Option
Selector Button is pushed, air in the
dishwasher is not heated. Using this
option helps save energy, but dishes take
longer to dry (overnight) and some water
spotting may result. Some items (such as
plastics) may need towel drying.
For best results, use a liquid rinse aid.
Hi-Temp Washing option
When the HI-TEMP WASHING Option
Selector Button is pushed, water for the
main wash and the final rinse is heated
to 145°F (63°C). If the water is already hot
enough, the cycle continues without
delay. For model WU6850V, the WATER
HEATING HOLD signal light will be on
while the cycle delays for water heating.
The Hi-Temp Washing option is
automatic in POTS & PANS cycle.
Using DELAY HOURS
1. Push desired Cycle Selector Button.
2. Push desired Option Selector
Buttons.
3. Turn Cycle Control Knob clockwise
to the number of hours you want the
dishwasher to delay before the
selected cycle starts.
4. Close and latch the door. For model
WU6850V, the DELAY WASH signal
light will come on and stay on untO
the cycle starts.
NOTE:
■ You can add items while time is
counting down. Close and latch the
door. The timer will not advance if
the door is unlatched.
■ Rinse & Hold and Low Energy Wash
cycles can't be delayed.
The CLEAN signal light
The CLEAN signal light will come on
when a washing cycle is complete.
To turn light off, turn the Cycle Control
Knob clockwise slightly until the light
goes off.
Page 5