The storage drawer, The anti-tip bracket – Whirlpool FGS387Y User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R A N G E
The storage drawer
You can remove the storage drawer to make it
easier to clean under the range. Use care when
handling the drawer.
Removing the storage drawer:
1. Empty drawer before removing. Pull drawer
straight out to the first stop. Lift front and pull
out to the second stop.
2. Lift back slightly and slide drawer all the
way out.
Replacing the storage drawer:
1. Fit ends of drawer slide rails into the drawer
guides on both sides of opening.
2. Lift drawer front and push in until metal stops
on drawer slide rails clear white stops on
drawer guides. Lift drawer front again to clear
second stop and slide drawer closed.
Drawer slide rail
The anti-tip bracket
The range will not tip during normal use. How
ever, tipping can occur if you apply too much
force or weight to the open door without the anti
tip bracket properly secured.
To verify the anti-tip bracket is engaged:
• Look to see if the anti-tip bracket is attached
with screws to the wall behind the backguard.
• Make sure the cable tether on the back of the
range is secured by the two hooks on the
bracket.
• See Installation Instructions for further details.
18