Using rinse and spin, Using drain and spin, What happens in each cycle – Whirlpool 6LBR5132BQ2 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Using Rinse and Spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and spin
is needed.
1. Push in the Cycle Control Knob and turn
clockwise to RINSE, as illustrated.
2. Pull out the Cycle Control Knob. The
washer fills to selected load size, agitates,
drains, and spins.
Using Drain and Spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in the Cycle Control Knob and
turn clockwise to SPIN, as illustrated.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
selected load size) before agitation and timing
start. The washer begins agitating immedi
ately after filling (agitation occurs with the
washer lid up or down). After agitation starts,
WASH
Fill
Wash selected time
Drain^
No agitation
tThe Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
fie
Spin
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
NOTES:
• The washer pauses briefly during the
Permanent Press cycle. This pause is
normal for washer operation.
RINSE
Fill
[%\
Rinse
Drain-No agitation
Spin-Spray rinse
fie
Spin
A
Off