Whirlpool 960 Series - Manual (Page 14)

S E T T I N G T H E C O N T R O L S
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press AIR DRY any time
before the DRYING indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the CANCEL/
DRAIN pad is pressed.
HIGH TEMP WASH
When HIGH TEMP WASH is selected, the
dishwasher heats the water
during the main wash of the LOW
ENERGY/CHINA, NORMAL, and
HEAVY cycles. Heating the water
helps improve washing results.
The POTS-N-PANS cycle automatically
uses HIGH TEMP WASH.
LOW ENERGY RINSE
When LOW ENERGY RINSE is selected,
the dishwasher does not heat
the water during the final rinse
of LOW ENERGY/CHINA,
NORMAL, HEAVY, and
POTS-N-PANS cycles.
NOTE: LOW ENERGY RINSE saves
energy, but dishes take longer to dry and
some spotting can occur. For best rinsing
and drying results, use a liquid rinse agent.
AIR DRY
When AIR DRY is selected, the air in the
■ dishwasher is not heated during
the “dry” portion of a cycle. Using
AIR DRY helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
“dry” portion of the cycle unless you select
AIR DRY.
Changing a cycle or an option setting
During the first minute _______ _______ ___
of a cycle HSil^^3^3IBI¥l
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
After the first minute
of a cycle
1. Press CANCEL7DRAIN. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
3. If desired, press one or more Option
pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
14