The anti-tip bracket, Zv ^warning – Whirlpool FEP310B User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R A N G E
The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
1
/r
zv
^WARNING
Personal Injury Hazard
•To reduce risk of range tipping over, secure range with a properly
installed anti-tip bracket supplied with range or an optional wall-
mounted anti-tip bracket kit.
• If range is moved for cleaning or service, check that anti-tip device
is engaged before using range.
Failure to folbw the above precautions could result in personal injury.
To verify the anti-tip bracket is
engaged (if you have a floor
bracket):
• Remove the storage drawer. (See page 15.)
• Look to see if the anti-tip bracket is attached
to floor with screws.
• Make sure one rear leveling leg is positioned
under the anti-tip bracket.
• See Installation Instructions for further details.
To verify the anti-tip bracket is
engaged (if you have a wall
bracket):
• Look to see if the anti-tip bracket is attached
with screws to the wall behind the control
panel.
• Make sure the cable on the back of the range
is secured by the two hooks on the bracket.
• Cable must be unhooked from wall bracket to
move range for cleaning or service. Recon
nect cable before using range.
• See Installation Instructions for further details.
Rear
leveling
leg
Floor bracket
r Cable
(attached
to rear of
control
panel)
16