Dryer belt replacement, Drive belt replacement – Whirlpool Thin Twin User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Dryer Belt Replacement
1. Remove the Dryer Toe Panel.
2. Remove the Lint Filter and the Lint Duct Assembly.
3. Remove the Blower Assembly.
4. Remove the Dryer Front Panel.
5. A new Drive Belt can now be looped over the Dryer
Drum.
(Fig. 27)
6. Loop the Drive Belt over the Drive Motor Pulley.
(Fig. 29)
7. Puli the Tension Pulley up and place the belt on it so that
the belt is tight when the pulley is released.
Drum
Idler Pulley
Motor Pulley
Belt Routing Diagram
Viewed From Front
f
Direction PartTUrns
Fig. 29
13
Advertising