Kenmore 630.7793 - Manual (Page 16)

To remove the Large Object Trap/ Cylinder Filter Assembly: To reinstall the filter system:
1
.
2
.
3.
4.
Remove the bottom rack.
Grasp the assembly and turn it counterclockwise
V a turn as shown below.
Lift out the assembly as shown below.
Carefully examine the assembly. If you find debris in
the Large Object Trap, turn it upside-down and gently
tap it on a surface such as a countertop to dislodge and
remove the debris.
5. Flush the Cylinder Filter clean by holding it under running
water.
1
.
2
.
3.
4.
Return the fine filter to its originally installed position.
Place the Large Object Trap/Cylinder Filter Assembly
into its installed position in the dishwasher floor.
Turn the ring handle clockwise 1 /4 turn until it is locked.
The arrow on the ring handle and the arrow on the Fine
Filter should point to each other, as shown below.
Gently pull the ring handle to ensure that the assembly
is locked into place.
• Clean the Exterior Door Panel
Colored Doors
Use only a soft cloth that is lightly dampened with soapy
water.
To remove the fine filter:
1. Lift the fine filter from the dishwasher floor as shown above
and flush it clean by holding it under running water.
2. Remove the Micro filter and flush it clean by holding it
under running water.
Stainless Steel Doors
Use a soft cloth with a non-abrasive cleaner (preferably a
liquid spray) made for cleaning stainless steel. For the best
results, apply the stainless steel cleaner to the cloth, then
wipe the surface.
• Clean the Door Gasket
Regularly clean the door gasket with a damp cloth to remove
food particles and other debris. Also clean the door seal,
located inside the dishwasher at the bottom of the door.
• Winterizing Your Dishwasher
If your dishwasher will be unused for an extended period
of time in a location that experiences freezing temperatures
(e.g., in a holiday home or through a vacation period), have
your dishwasher winterized by an qualified service center.
1 6