Kenmore 180 User Manual
Ultrasoft water softeners, Installation |\/ian ual, Kgnmorg
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
|\/IAN UAL
MODEL NOS.
UltraSoft 170
625.388170
UltraSoft 180
625.388180
UltraSoft 275
625.388270
UltraSoft 280
625.388280
Caution:
Read and Follow
All Safety Guides
Before You Start To
Install Your Softener.
If you have questions when
installing, operating or main
taining your softener, and
when setting the timer, call
this toll-free number...
1-800-426-9345
WWW.
Ken moreWater.com
SAVE THIS MANUAL
KGnmorG
UltraSoft Water Softeners
With
valve
designed for plumbing up to 1 inch
♦ Safety Guides
♦ Unpacking
♦ Where To Instai
♦ How To Install
♦ Pressure Testing
!(E|:
Systems Tested and Certified by NSF International
against NSF/ANSI Standard 44for softener performance.
Use the plastic bag and tie provided, to hang manuals
nearby the softener for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
PRINTED IN U.S.A.
7258997 (Rev, F 7/1/05)
Document Outline
- INSTALLATION |\/IAN UAL
- MODEL NOS.
- UltraSoft 170 625.388170
- UltraSoft 180 625.388180
- UltraSoft 275 625.388270
- UltraSoft 280 625.388280
- !(E|:
- Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
- INTRODUCTION
- A. SAFETY GUIDES
- B. UNPACKING THE WATER SOFTENER
- C. WATER SYSTEM TESTS
- A. WHERE TO INSTALL THE WATER SOFTENER
- B. TOOLS, PIPE AND FITTINGS, OTHER MATERIALS NEEDED
- B. PIPE AND FITTINGS, PLAN DRAWING
- C. TYPICAL SOLDERED COPPER (OR PVC) IN AND OUT PIPES TO SOFTENER
- D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER
- A. ASSEMBLE INLET-OUTLET ADAPTORS, OR PLASTIC BYPASS VALVE
- A. ASSEMBLE INLET-OUTLET ADAPTORS, OR PLASTIC BYPASS VALVE
- B. INSTALL 3-VALVE BYPASS
- C. LOCATE WATER SOFTENER, AND CONNECT PIPES
- D. CONNECT VALVE AND SALT TANK DRAINS
- D. CONNECT VALVE AND SALT TANK DRAINS
- E. PRESSURE TEST / CHECK FOR LEAKS
- F. GROUNDING / CONNECT TO ELECTRICAL POWER
- F. GROUNDING / CONNECT TO ELECTRICAL POWER
- INSTALL COVERS
- RESTART THE WATER HEATER
- INSTALLATION
- MANUAL
- MODEL NOS.
- UltraSoft 425 625.388460
- UltraSoft 480 625.388480
- UltraSoft 800 625.388800
- UltraSoft 880 625.388880
- INTRODUCTION
- A. SAFETY GUIDES
- B. UNPACKING THE WATER SOFTENER
- C. WATER SYSTEM TESTS
- A. WHERE TO INSTALL THE WATER SOFTENER
- B. TOOLS, PIPE AND FITTINGS, OTHER MATERIALS NEEDED
- B. PIPE AND FITTINGS, PLAN DRAWING
- C. TYPICAL SOLDERED COPPER (OR PVC) IN AND OUT PIPES TO SOFTENER
- D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER
- A. ASSEMBLE INLET-OUTLET ADAPTORS, OR PLASTIC BYPASS VALVE
- A. ASSEMBLE INLET-OUTLET ADAPTORS, OR PLASTIC BYPASS VALVE
- B. INSTALL 3-VALVE BYPASS
- C. LOCATE WATER SOFTENER, AND CONNECT PIPES
- D. CONNECT VALVE AND SALT TANK DRAINS
- D. CONNECT VALVE AND SALT TANK DRAINS
- E. PRESSURE TEST / CHECK FOR LEAKS
- F. GROUNDING / CONNECT TO ELECTRICAL POWER
- F. GROUNDING / CONNECT TO ELECTRICAL POWER
- INSTALL COVERS
- RESTART THE WATER HEATER