Kenmore 790.4809 - Manual (Page 9)

Setting the Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
Timer Fiex ^ ^
The Set/ofi and
Clean
pads control the Continuous Bake or
12
Hour Energy Saving features. The
oven control has a factory preset built-in
12
Hour Energy Saving feature that will shut off
the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for Continuous Baking.
INSTRUCTIONS PRESS
DISPLAY
To set the control for Continuous Bake or 12 Hour Energy
Saving features
Timer
1. Press and hold
Set/off
for 7 seconds or until the control beeps once
(Fig. 1). "12Hr OFF" or "StAy On" will appear in the display and
the control will beep once.
Fiex
Press Clean to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12Hr OFF" (Fig. 2) in the
display indicates the control is set for the 12 Hour Energy Saving
mode and "StAy On" (Fig. 3) indicates the control is set for the
Continuous Bake feature.
2.
3. Press to accept the change (Fig. 4; display will return to time
of day) or press v
—'
to reject the change.
Timer
set/off for 7 seconds
Flex
Clean
VsTAfff/ vsTOp;
Fig. 1
I'i Hr
O f f
Fig. 2
St fiy O n
Fig. 3
lOn
I J U
Setting Tinner
Timer
The TIMER
Set/off
pad controls the Timer feature. The Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking.
The Timer feature can be used during any of the other oven control functions. Refer to
“Minimum and Maximum Control Pad Settings” for time amount settings.
Fig. 4
INSTRUCTIONS PRESS DISPLAY
To set the Kitchen Timer (example for
5
minutes)
1. Press set/off (Fig. 5).
2. Press the number pads to set the desired time in the display
example 5). Press V— T h e time will begin
a
count down (Fig. 6).
Note: If v_y is not pressed the timer will return to the time of day
after 25 seconds.
3. When the set time has run out, the clock will sound with 3 long
Timer
beeps every 5 seconds until Set/Off is pressed (Fig. 7).
To cancel the Timer before the set time has run out
Timer
Press
Set/Off.
The display will return to the time of day.
Timer
Set/Off
Timer
Set/Off
Timer
Set/Off
Fig. 5
c-nn
J-UU
Fig. 6
E nd
Fig. 7
To Set Add 1 Minute Feature
Add 1 Add 1
The Minute pad is used to set the Add 1 Minute feature. When the Minute pad is pressed, 1 minute is added to the Timer feature
... . . . . Add 1 ^ ^ ^
if this feature is already active. If the Timer feature is not active and the
Minute
pad is pressed, the Timer feature will become
active and will begin counting down from 1 minute. For further information on how to set the Timer feature see Setting Timer
instructions above.