Uniden Cordless Telephone - Manual (Page 42)

Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You can choose from three ringer volume settings on the handset and base (off, low,
and high). With the phone in standby, use [>./'»"] on the four-way function keys to ad­
just the ringer volume.
Adjusting the Speaker Volume
Ear speaker: You can choose from six volume levels for the earpiece speaker. To ad­
just the earpiece volume while on a call, press [ a ] (to make it louder) or [-»"] (to make
it softer).
Speaker: You can choose from six volume levels for the handset speakerphone and
ten volume levels for the base speakerphone. To adjust the speaker volume while on a
call, press (to make it louder) or [>'] (to make it softer).
T-coil (Handset only)
Digital spread spectrum cordless phones generate magnetic signals that could cause noise to be heard by users
wearing hearing aids set to “T” mode. (The “T” mode is only found on hearing aids equipped with a telecoil (“T” coil)
feature). This phone includes a special “T-coil” mode that, when activated, reduces the magnetic noise generated by
the handset. To activate the “T-coil” mode perform the following steps on your handset:
1) Press the MENU soft key.
2) Select the HANDSET SETUP menu, and then the T-COIL submenu.
3) Move the cursor to select ON or OFF.
4) Press the OK soft key. You will hear a confirmation tone.
Note: Using the T-coil feature may shorten your battery’s talk time, please set to off when not using this feature.
41