Tv screen & selectors, Effect – E-MU 1616M PCIe User Manual
Page 43
![background image](/manuals/674553/43/background.png)
4 - The PatchMix DSP Mixer
Main Section
E-MU 1616/1616M CardBus Digital Audio System
43
TV Screen & Selectors
The “TV screen” at the top of the main section is a multi-function display and control
center for the input and output routings and effect controls. The three buttons at the top
of the display select the current function of the display—Effect, Inputs or Outputs.
Effect
E
Note: Effects have to
be placed into an insert
location before you can
program them.
Select the Effect display view in the main section, then click on an Effect Insert to
display the effect parameters. If an insert effect is not selected, the display will read “No
Insert”.
Most effects have a wet/dry mix parameter to control the ratio of effect to plain signal.
The wet/dry setting is stored with the effect preset. The parameter set varies with the type
of effect.
for detailed information about the individual effects.
When a Send or a Send/Return insert is selected with the effects display enabled, the TV
screen shows you where the Send is going and where the Return is coming from. The
bypass or solo buttons at the top of the display are available for Send/Return type inserts
only.
Effect Display
View Button
Effect Location
Wet/Dry Mix Control
Effect Parameters
Effect Bypass &
Solo Buttons
User Preset Section
Send Destination
Return Source