Casio EXILIM EX-FH20 User Manual

Page 58

Advertising
background image

58

Recording Movies

NOTE

• Continuous Auto Focus is performed during movie recording when optical zoom is

turned on while “HD/STD” is selected as the movie mode, regardless of the current
Continuous AF setting. If optical zoom is turned off, continuous Auto Focus is not
performed during movie recording, regardless of the current Continuous AF setting.

• When “HD/STD” is selected as the movie mode and optical zoom is turned off, you

can readjust focus while movie recording is in progress by half pressing the shutter
button. Note, however, that noise produced by the lens operation will be picked up
in the audio recording.

• Focus is fixed during movie recording when “HS” is selected as the movie mode.
• The YouTube mode is disabled automatically during HD movie recording when

HD/STD” is selected as the movie mode.

• The [BS] button and BEST SHOT feature are disabled during movie recording.
• Spending a long time using movie recording will cause the camera to become

slightly warm to the touch. This is normal and does not indicate malfunction.

• Use of certain types of memory cards slows down data transfer and increases the

time it takes to record movie data, which can result in movie frames being dropped.
The “0 REC” indicator on the monitor screen turns yellow to indicate that frames
are being dropped. In order to avoid problems such as these, use of an Ultra High-
Speed Type SD memory card is recommended. Note, however that CASIO makes
no guarantees about the operation of any Ultra High-Speed Type SD memory card
used with this camera.

• The effects of camera movement in an image become more pronounced when you

shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.

• Face Detection is disabled during movie recording.
• The exposure mode changes to

t

(Auto) automatically whenever you shoot a

movie with the “STD” or “HD” movie mode (pages 56, 59).

• The aperture, shutter speed, and ISO sensitivity settings (M Mode only) configured

with the snapshot A Mode, S Mode, or M Mode are used when shooting a movie
with the “HS” movie mode (page 59). Note, however, that the shutter speed range
is limited in accordance with the frame rate specified for the high-speed movie.

• The [AEL] button is disabled (AE lock and AF lock do not function) while “HS” or

HD/STD” is selected as the movie mode.

B

Advertising
This manual is related to the following products: