EVCO c-pro giga - Manual (Page 17)

C-PRO GIGA HARDWARE MANUAL
Pag. 17
There are also some LEDs with diagnostic meaning (note: the L5, L6 LEDs are located inside the
controller case)
LED L1 Local CAN communication status
On rapidly blinking OK
On slowly blinking Warning
On continuous Bus Error
Off Bus OFF
Led L2 Local CAN communication status
On rapidly blinking OK
On slowly blinking Warning
On continuous Bus Error
Off Bus OFF
Led L3 Real Time Clock status
On rapidly blinking -
On slowly blinking Low_Voltage detected
On continuous Read_Error
Off OK
Led L4 EEPROM memory status
On rapidly blinking CRC_Error
On slowly blinking Write_Error
On continuous Read_Error
Off OK
LED L5 Interrupt
It indicates the interrupt operating status of the controller: when blinking at 1 Hz, that indicates the
internal controller times are properly working