Casio PX-800 - Manual (Page 23)

Recording and Play Back
E-19
1.
Press the RECORDER button so the PLAY
lamp is lit.
2. Use the + and – buttons to display a song
number (1 to 5).
3. Press the RECORDER button so the REC
lamp is flashed.
• This will cause the L/1 lamp to flash.
4. Use the PART/TRACK button to select the
track to which you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example: To listen to playback of Track 1 as you record
to Track 2
5. Select the tone and effects you want to use
for your recording.
6. Press the SONG PLAY/STOP button or play
something on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
7. To stop recording, press the SONG PLAY/
STOP button.
1. Press the RECORDER button so the PLAY
lamp is lit.
2. Use the + and – buttons to display a song
number (1 to 5).
NOTE
• When a song has something recorded in both tracks, you
can turn off one track and play back just the other track,
if you want. Whether a track is on or off is indicated by
the lamps above the PART/TRACK button. Each press of
the PART/TRACK button cycles through the different
possible track on/off settings.
3. Press the SONG PLAY/STOP button.
This starts playback of the song and/or track you
selected.
NOTE
• You can change the tempo setting as a track is playing.
• You cannot change the tone setting during playback.
• Press the SONG PLAY/STOP button again to stop
playback.
To record to one track of a
song while listening to the
playback of the other track
This indicator appears when the track already
contains recorded data.
Lit (Play) Flashing (Record Standby)
Playing Back from Digital
Piano Memory
PX800_e.book 19 ページ ２００６年１０月１２日 木曜日 午後１２時５分