FingerTec TA200 Plus Manual - Manual (Page 19)

20 CONTENTS
5 • SYSTEM
System Settings
threShold
Threshold is the level of the fingerprint scanner’s sensitivity. Threshold determines how
many percent of minutiae points on a fingerprint template will be read by the system.
The higher the threshold level, more points are being read, more restricted the system.
Configure the threshold for 1:1 and 1:N methods.
For 1:1, the range is from 0-50 and the recommended value is 15.
For 1:N, the range is from 0-50 and the recommended value is 5.
Press Menu > System > System > Threshold (1:1) or Threshold (1:N) > Determine the
Level > OK to Save
dAte FormAt
The date format can differ based on countries for example in Malaysia, the date-month-
year format is used while in America, the month comes first. Choose your date format
according to your preference. The default format is dd-mm-yy. Press Menu > System >
Date Format > Select Format > Ok to Save
SoUNd oF KeyBoArd
The terminals emit sound when you press any of its buttons. To turn on/off the keypad
sound: Press Menu > System > Keybeep > On/Off >Ok to Save
FINger SeNSItIVIty
Determine the sensitivity of the sensor to fingerprint. Choose Low, Mid or High sensi-
tivity. It is recommended to be set at Mid. Press Menu > System > Finger Sensitivity >
Select your preference >Ok to Save
VoICe
The terminal has certain voice commands to guide users during enrolment and to no-
tify users during verification. Press Menu > System > Voice > On/Off > OK to save
VolUme (%)
Voice Control lets you control the level of volume emitted by the terminal.
Adjust Volume: The default volume of the terminal is 60. The volume can go as high as
100 and as low as 0. To sustain the performance of speaker in the terminal, it’s recom-
mended to stay at the range of 60-70. To adjust the volume. Press Menu > System >
Volume 1:100% > Set your number > Ok to Save.
AlgorIthm VerSIoN
Get the terminal’s algorithm version here. Press Menu > System icon > System > Alg
Version > View the Version > Ok to Save.