Futaba 4GRS - Manual (Page 52)

Setting item
STR :Steering (1st channel)
THR :Throttle (2nd channel)
CH3 :3rd channel
CH4 :4th channel
Move the cursor to "STR, THR,
CH3 and CH4" with the (JOG)
button.
Press
Press
(HOME screen)
(MENU 2 screen) (REVERSE screen)
Press
(MENU 1 screen)
Press
Select
"REVERSE"
52
Fu
nc
tio
n
Servo Reverse "REV"
However, when the position set by trim or subtrim shifts from
the center, the center becomes the opposite side.
Servo Reverse "REVERSE" (All channel)
This function reverses the direction of operation of the servos related to transmitter
steering, throttle, and channel 3 /4 operation.
(Preparation)
- Select the channel to be set using the (JOG) button up or
down operation.
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo
operation direction.
NOR/REV can also be set using (JOG) button
left or right operation
(Each channel can be set similarly.)
Servo Reverse Function Setting
Select button
- Select with the (+) or (-) but-
tons.
Display to "REVERSE" screen by the following method:
2
When completed, move the cursor to [RT] using the (JOG)
button, and return to the MENU1 screen by pressing the
(JOG) button.