Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 46)

Telemetry function ON
Receiver setting T-FHSS
Receiver setting S-FHSS
Receiver setting FASST
Telemetry function ON
Receiver setting T-FHSS
HOME
screen
MENU 2
screen
or
MENU 1 screen
Press
Press
Receiver setting
T-FHSS
S-FHSS
FASST
Servo type setting
Analog
servo
Digital servo
T-FHSS Receiver ID
Telemetry function
ON/OFF
Link
Only T-FHSS
Pre Press
Press Press
46
Fu
n
c
tio
n
Select telemetry by (JOG) button operation.
1
(Function ON/OFF)
Select the type and ON/OFF by (+) or (-) button.
2
When ending, return to the menu screen by pressing the
(END) button.
Telemetry function ON/OFF
Receiver Setting /Servo Type
This menu selects the settings matched to the receiver system used and the type of servo
and the items selected at the T4PX, linking of the T4PX with the T-FHSS telemetry system,
and ON/OFF.
The receiver setting and selection and linking of the T4PX transmitter with a T-FHSS telemetry
system receiver are described on P36~39. Please read them.
Function
Receiver Setting / Servo Type
Receiver
The T4PX transmitter can use the S-FHSS and FASST system receivers, as well as the
R304SB T-FHSS system receiver supplied. However, only the "C2" type (R614FS/FF/FF-
E,etc) receivers can be used with the FASST system. The R603FS/FF "C1" type receiver
does not operate. Make your selection by matching to the system of the receiver to be used.
The model data remains unchanged even if the receiver setting is changed.
"Digital servo type" or "Analog servo type" servo type can be selected. However, the
"Digital servo type" is for Futaba digital servos (including BLS Series brushless servos)
use only. When using other servos, select the "Analog servo type". All servos, including
digital servos, can be used in the "Analog servo type".
Servos