Galaxy Audio RM-CD - Manual

Anti Shock CD / USB / SD Card Reader / Remote Control Player
RM-CD
DESCRIPTION OF CONTROLS:
POWER: ON: Press Power button to switch on the power.
OFF: Press and hold to
switch off the power.
CD / USB / SD: Press this key to select USB, SD, or CD mode.
REV: Press and release to select previous track number. Press and hold for fast
reverse.
F.WD: Press and release to select next track number. Press and hold for fast forward.
PLAY / PAUSE: Press once to play, press again to pause.
STOP/ EJECT: Press once to stop play. Press again to eject disc.
1. When stopped the LCD will display all track numbers.
2. When pressed again the LCD shows “EJECT”. Press again to re-insert the disk.
 Infrared window: Picks up the signal from the remote control.
 USB Connector: Used to play MP3 files from an external source.
 SD Card Slot: Accepts SD and SDHC Cards containing MP3 files.
 FOLDER : Press to select next folder.
 FOLDER : Press to select previous folder.
 MUTE: Press to mute audio.
 SHU. / ENTER: Shuffle and execute button. Press once to activate shuffle feature. The
LCD display will show “SHUFFLE” and start to play from available tracks. When in the
programming mode, this button will execute the ENTER command.
 PROG: Press to program the order of track play.
1. To program WAV files from CD media: Press once till the LCD display shows
“PROGRAM”, then use the SKIP previous or next buttons to select the first track.
Then press the ENTER button. Repeat SKIP and ENTER commands to program
additional tracks. When finished, press PLAY. The LCD will show “MEMORY” and
start to play the programmed tracks.
2. To program MP3 files from CD, USB, or SD media: Press once till the LCD display
shows “PROGRAM” then press FOLDER to select the desired folder,
then use the SKIP previous or next buttons to select the first track. Then press the
ENTER button. Repeat SKIP and ENTER commands to program additional tracks.
When finished, press PLAY. The LCD will show “MEMORY” and start to play the
programmed tracks.