GME GS500 - Manual (Page 2)

introduction
Congratulations on your purchase of the GME Marine Speakers.
These speakers are designed to the highest level of quality and will offer
you years of listening enjoyment.
Thank you for making GME your choice for marine audio equipment.
SuPPLiEd in tHE BoX
• 2 x S5 Speakers with white grilles
• 2 x 5 metre lengths of speaker cable
• 8 x mounting screws
• 8 x mounting clips
• 1 x mounting template
• 1 x instruction manual
Optional accessory – black speaker grilles x 2 (part number S5BG)
mountinG inStructionS
PrEcautionS
1. Please avoid contact with inside speaker wire
2. Do not change the polarity of the speaker terminal assembly
3. Make sure lead and speaker terminals do not contact metal.
4. When making connections, please refer to the instruction manual
of marine stereo used.
mountinG
1. When mounting the speakers in the kick panel, make sure there
is a clearance of 55 mm (2.17”) behind the well.
55
122
163
(2.17”)
(4.8”)
(6.4”)
2. Use the template supplied to mark the position of the mounting screws
and the outline of the speaker hole. Drill the mounting holes using a
3.3 mm drill bit and cut the hole for the speaker.
connEctinG
1. Attach the speaker wires (supplied) to the speaker terminals be sure to
connect the striped wire to the negative (–) terminal, and the other wire
to the positive (+) terminal of the speaker. Connect the other end of the
speaker wires to your amplifier/stereo.